Quick Guides
Cheat-sheet style reference guides for 3D printing. Settings tables, calibration checklists, and step-by-step workflows - all in one place.
Paid members get full access to all guides - £2/month or £5 one-time.
FDM Troubleshooting Reference
Every common FDM problem, cause, and fix in one place.
- ›Stringing, warping, layer adhesion
- ›Under/over extrusion
- ›Bed adhesion issues
- ›Clogged nozzles
- ›Quick-reference fix tables
OrcaSlicer Quick Guide
Key settings, calibration tools, and workflows for OrcaSlicer.
- ›First-time setup
- ›Key print settings explained
- ›Built-in calibration tools
- ›Supports and multi-plate
- ›Recommended profiles
PrusaSlicer Quick Guide
Key settings, multi-material setup, and calibration in PrusaSlicer.
- ›First-time setup
- ›Print / filament / printer profiles
- ›Supports and painting
- ›Variable layer height
- ›Multi-material (MMU)
Cura Quick Guide
Essential settings, plugins, and profiles for Ultimaker Cura.
- ›Printer setup
- ›Custom vs recommended settings
- ›Most important settings explained
- ›Useful plugins
- ›Profile import/export
Filament Quick Reference
Settings tables, properties, and tips for every common filament.
- ›PLA, PETG, ABS, ASA, TPU, Nylon
- ›Settings tables per material
- ›Storage requirements
- ›Common problems per material
- ›Material comparison chart
Calibration Checklist
The correct order for calibrating any FDM printer from scratch.
- ›Step-by-step calibration order
- ›E-steps / rotation distance
- ›Bed levelling and Z offset
- ›Flow rate and pressure advance
- ›When to re-calibrate
How to Do a Cold Pull
Clear a clogged or dirty nozzle without disassembly.
- ›What a cold pull is
- ›Step-by-step method
- ›Best filament to use
- ›When to repeat
- ›When a cold pull is not enough
Setting Z Offset From Scratch
Dial in perfect first layer adhesion step by step.
- ›What Z offset does
- ›Paper method
- ›Live adjust method
- ›Reading the first layer
- ›Common mistakes
How to Add a Brim in Any Slicer
Stop warping and improve bed adhesion with a brim.
- ›What a brim does
- ›When to use one
- ›Brim settings in OrcaSlicer
- ›Brim in PrusaSlicer
- ›Brim in Cura
- ›Removing the brim cleanly
What to Do When a Print Fails Mid-Way
Diagnose what went wrong and decide whether to restart or recover.
- ›Stop the print safely
- ›Diagnose from the evidence
- ›Layer shift
- ›Detached from bed
- ›Spaghetti / stringing mess
- ›Clog
- ›Whether to attempt recovery
How to Update Your 3D Printer Firmware
Klipper, Marlin, and Bambu Lab firmware updates explained.
- ›Why update firmware
- ›Marlin update process
- ›Klipper update via Mainsail/Fluidd
- ›Bambu Lab firmware update
- ›What to re-calibrate after updating